Small incinerators for the solid waste equipment in waste management yard.
Items/Model |
TS150(PLC) |
Principle |
Waste Incineration Treatment |
Burn Rate |
Average 50-100 kg/hour |
Feed Capacity |
Average 750kg/feeding |
Control Mode |
PLC(Programmable Logic Controller Incinerator) |
Combustion Chamber |
1570L |
Internal Dimensions |
150x100x105cm |
Secondary Chamber |
750L |
Smoke Filter Chamber |
Yes |
Feed Mode |
Manual |
Voltage |
210/230V 50/60Hz |
Power |
0.9Kw |
Oil Consumption (kg/hour) |
Average 20.4(D.O) |
Thermal capacity(kw/hour) |
166-332 |
Gas Consumption (m3/hour) |
*** |
Temperature Monitor |
Digital Display |
Temperature Protection |
Yes |
Oil Tank |
300L |
Feed Door |
80x60cm |
Chimney |
10Meter |
Chimney Type |
Stainless Steel |
1st. Chamber Temperature |
800℃–1000℃ |
2nd. Chamber Temperature |
1000℃-1200℃ |
Residency Time |
2.0 Sec. |
Gross Weight |
8500kg |
External Dimensions |
300x160x280cm(without chimney) |
Incinerator comprising of a two-stage unit of a primary loading chamber and a secondary after burner chamber. The after-burner system draws hot gases from the primary chamber and ensures a clean burn at 850-1150 degrees Celsius.
Primary Chambe「 volume (m3) Not less than 1.54
Load capacity (kg) Not less than 750
Nominal burn rate (kg/hr) Less than 50
Burn Rate (kg/hr) Plus 50
Thermal capacity (kw/hr) Plus or minus 190
Power supply 50/60hz 210/230v
Diesel Yes
Prefabricated robust mild steel casing not less than lOmm, seam welded and suitably stiffened I braced where necessary. Steel structured painted using high grade paint system. Primary and secondary chamber lining thickness of not less than 180mm, rated at 1430 degrees Celsius. At least three layers of
paint standard as 800 Celsius. thickness 164mm, rated 1750 Celsius
refractory lining in the primary and secondary chambers of not less than 180mm total thickness providing increase fuel efficiency. Lightweight resilient refractory fibre insulation lid providing a tight seal giving thermal efficiency. Weather proof combustion fuel pipes and electrical systems to resist marine type of weather.
Primary Chamber:
Fully insulated internal refractory lining,constructed from high grade refractory brick. High alumina content refractory bricks. Manual operated access lid. Waste ignition burner, temperature controlled on and off with internal air fans. heavy duty 价ebrick 1750 Celsius by wall. refractory cement by Secondary Chamber: bottom and toρ.
Fully insulated internal refractory lining,constructed from high grade low thermal mass insulation. Secondary chamber burnout burner, temperature controlled on and off with internal air fans. Integrated combustion burner air fans with an automatically controlled distribution. Temperature sensor mounted
at the top of the chamber ensuring the chamber reaches the necessary temperature 850I 1100 Degrees Celsius minimum. heavy duty firebrick 1750 Celsius by wall. refractory cement by bottom and toρ.
operation temperature 1000-1200 Celsius
Waste loading and De-Ashing:Loading through the main access door. At the end of every incineration, ash should be discharged through the loading door.primarv chamber: feedina door臼lso ash door). secondary chamber:
HICLOVER – Medical Environmental, WWW.HICLOVER.COM, Waste Incinerators,
Medical Waste Incinerator,Pet Animal Cremation, Solid Waste Incinerators
HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator(Containerized Mobile Incinerator)
Tel: +86-25-8461 0201
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com
Email: sales@hiclover.com
Email: hicloversales@gmail.com
Website: www.hiclover.com
Email: sales@hiclover.com
Email: hicloversales@gmail.com
Nanjing Clover Medical Technology Co.,Ltd.
2020-07-08